Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.9K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 7
ORB XY | String Art Pendant Light 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 7
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model
ORB XY | String Art Pendant Light 3d model

ORB XY | String Art Pendant Light

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

ORB XY | String Art Pendant Light E27 & E26 fast print

Like two dream-catchers crossing mid-air.

A variation of the ORB pendant light I released a year ago.

In this version the 2 string-art discs cross each other at the same level (hence the XY in the name), whereas in the original version the discs are on top of one another.

The mounting bracket can fit E27, E26 sockets.

You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK

For the US: E26/E27 cord: https://amzn.to/434c0qZ

Happy printing!

DIMENSIONS (assembled) | Ø 249.5 mm x H 249.5 mm DIMENSIONS (discs) | Ø 249.5 mm x 6.3 mm

3D PRINT SETTINGS: The two discs have to be printed flat. The STL files are already oriented properly. You'll also find the .3MF file, configured in Bambu Studio. It may open properly in some slicers, but some might set all settings to default when you open the file.

DISCS: The only trick for the discs is to set the layer height to 0.3mm. You may have to set the "line width" to about 0.42mm and the "overhang speed" to 30mm/s. This is by default in Bambu Studio, but you may have to set it manually if you use other slicers and printers.

For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings.

Wall line count: 2 Layer height: 0.3mm/layer or less Infill: 15% top/bottom layer pattern: concentric Build adhesion type: None Supports: None

E27 BRACKET: The mounting bracket prints upright and the STL is already oriented properly. Go with default settings, maybe 3 perimeter walls if you want to make it a bit stronger.

Wall line count: 2 or 3 Layer height: 0.2mm/layer Infill: 30% Build adhesion type: None. Supports: None


Discussions

ORB XY | String Art Pendant Light

26 downloads · 7 months ago in  and 
Charles R
CharlesRegaud2.9K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more