MANDO | paper towel roll holder
Store your kitchen paper towel roll in style with this elegant wicker roll holder.
Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)
It comes in 2 sizes: a tall one (height 250mm), and one shorter (height 215mm) that can be printed on PRUSA printers.
Happy printing!
DIMENSIONS (Large) | Ø 142 mm x H 250 mm DIMENSIONS (Small) | Ø 142 mm x H 215 mm
PRINTING | ~5h
V2 UPDATE: This new version has a slightly thicker weave of 0.5mm, instead of the original 0.4mm weave that appeared as empty layers in some slicers. Also, I made the frame a little bigger/stronger, which should give a cleaner print.
3D PRINT SETTINGS The roll holder prints upright without supports or brim. The STL file is all already oriented properly.
For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty.
Layer height: 0.3mm/layer Wall line count: 2 Build adhesion type: None Supports: None Infill: 20~30%