Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.9K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 5
MALLA | nut bowl 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 5
MALLA | nut bowl 3d model
MALLA | nut bowl 3d model
MALLA | nut bowl 3d model
MALLA | nut bowl 3d model
MALLA | nut bowl 3d model
MALLA | nut bowl 3d model

MALLA | nut bowl

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

MALLA | nut bowl

Spin. Crack. Snack. Repeat.

Built for organized human squirrels.

This double-decker bowl keeps your stash of nuts in motion, with rotating plates and a central hideout for your nutcrackers.

DIMENSIONS (bottom plate) Ø209mm H 40mm DIMENSIONS (top plate) Ø209mm H 30mm

3D PRINT SETTINGS: All STL files are already oriented properly. You need to print 4 parts: • a bottom plate • a top plate • a cylinder • an optional divider, if you want your nutcrackers to stand more upright.

THE PLATES & CYLINDER • Set the layer height to 0.3mm for a 0.4mm nozzle, or 0.4mm for a 0.8mm nozzle. (0.2mm would also work but much slower).

The items in the pictures were printed with a 0.8mm nozzle, 2 perimeter lines. But you can also print with a 0.4mm nozzle, in which case you'll get 4 perimeter lines.

On the 3D model, the bottom face of the plates appear full. That's normal. To achieve the woven pattern of those faces you have to: • turn off the top and bottom layers (set to 0) • pick an infill pattern of your choice (gyroid pattern on the pictures) • On top of that, for 0.4mm nozzles, push the "infill line width" (sparse infill and internal infill) to 0.6mm to make the weave of the front face nice and strong • Set the infill to about 35% for a 0.8mm nozzle, and about 30% for a 0.4mm nozzle with 0.6mm infill line width.

Layer height: 0.3 mm Top layers: 0 Bottom layers: 0 Infill pattern: gyroid 30 to 35% Infill line width: 0.6 to 0.8mm Infill-wall overlap: 50% Build adhesion type: None Supports: None

For Bambu Lab users, make sure to:

  • turn OFF "slow down for overhangs"
  • set "wall generator" to "arachne".

DIVIDER Go with any settings you like. I printed mine in "vase (spiral) mode to save time. But you can print it full with default print settings.

Happy printing!


Discussions

MALLA | nut bowl

15 downloads · 3 months ago in  and 
Charles R
CharlesRegaud2.9K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more