LMNT | coasters, 4 elements
Fire, Earth, Wind and Water. 4 Elements. 4 coasters, each fashioned after one element.
This LMNT set also comes with a convenient rack to store away your coasters.
Happy printing!
DIMENSIONS (coasters) | W 96.5mm x D 86.5mm x H 9 mm
DIMENSIONS (rack) | W 109mm x D 114mm x H 39 mm
3D PRINT SETTINGS All STL files are already oriented properly. The rack prints upright. The coasters print vertically (not flat). You can group the coasters parallel and very close to each other, so that the brim at the base encloses all 4 together.
Resolution: 0.3mm/layer or less Wall line count: 2 Infill: 20% Build adhesion type: 4mm Brim for the coasters (none fot the rack) Supports: None
The white rack on the pictures was printed with some "fuzzy skin":
- fuzzy skin thickness: 0.25mm
- fuzzy skin point distance: 0.8