tracking pixel
CharlesRegaud

GEM | Cache-pot Planter

by
CharlesRegaud
Follow
Follow
Remix Model
CharlesRegaud
CharlesRegaud
|
Image 2 of 6
GEM  |  Cache-pot Planter 3d model
CharlesRegaud
CharlesRegaud
|
Image 2 of 6
GEM  |  Cache-pot Planter 3d model
2D
3D
Makes
GEM  |  Cache-pot Planter 3d model
GEM  |  Cache-pot Planter 3d model
GEM  |  Cache-pot Planter 3d model
GEM  |  Cache-pot Planter 3d model
GEM  |  Cache-pot Planter 3d model
GEM  |  Cache-pot Planter 3d model

GEM | Cache-pot Planter

This cachepot planter is the newest edition to the GEM collection.

DIMENSIONS (Small) | Ø 130mm x H 130 mm (inner diameter Ø 120 mm)

3D PRINT SETTINGS For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. The wall thickness is 2.6mm, so that makes for about 6 wall lines with a 0.4mm nozzle. That's plenty to make it watertight.

Resolution: 0.2~0.3 mm Infill: gyroid ~20% Build adhesion type: None Supports: None


3 Likes16 DownloadsMarch 15, 2024