Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

or
Thangs Bundle

Want this model? Get it instantly with Thangs Bundle plus thousands of other premium designs from 250+ top creators.

Charles R
CharlesRegaud2.8K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 8
FREYA  |  Standing Planter Pot 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 8
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model
FREYA  |  Standing Planter Pot 3d model

FREYA | Standing Planter Pot

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

FREYA | Standing Planter Pot

Add a touch of sophistication and playful charm to your space with the FREYA four-legged planter.

The patterns on the pot come in 4 versions:

  • Ribbed
  • Fan pattern
  • Rocky texture
  • Wood texture.

It comes with an internal draining plate to make sure the soil drains properly but keeps getting some water from the underneath the draining plate by capilarity.

Detailed print settings below.

DIMENSIONS (pot) | W 156mm L 156mm x H 170 mm

3D PRINT SETTINGS: For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count (perimeter walls) to 3.

POT & LEGS:

  • Resolution (layer height): 0.2~0.3 mm or less
  • Wall line count (perimeter walls): 2 to 3
  • Infill: 15 to 20%
  • Build adhesion type: None
  • Supports: None

DRAINING MESH PLATE: The draining plate 3D model is full. That's normal. To create the mesh pattern, set the top and bottom layers to 0, to cancel top and bottom faces. Then set the infill pattern of your choice to 20%.


Discussions

FREYA | Standing Planter Pot

145 downloads · 1 year ago in 
Charles R
CharlesRegaud2.8K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more