Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.8K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 10
CURL  |  Knife Rack 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 10
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model
CURL  |  Knife Rack 3d model

CURL | Knife Rack

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

CURL | Knife Rack

For a while I've been trying to design of large capacity knife rack that prints faster than my previous designs. This CURL knife rack is the result.

On my printer it prints in 5 hours, instead of the 8 to 12h required for my other knife racks. The stand and the V8-shaped knife holder are made of continuous curves layer after layer, allowing your printer to operate at maximum speed throughout the print.

There are 4 rows of 2 slots each, and a long slot in the middle for a chinese butcher knife. Middle slot: (L84mm) for Chinese chopping knife Top row: (W70mm x2) for chopping knives 2nd row: (W60mm x2) for chef knife and regular kitchen knives 3rd row: (W50mm x2) for regular mid-size kitchen knives or chef knife Bottom row: (W30mm x2) for boning knives or paring knives

DIMENSIONS | W 160mm x L 192mm x H 250 mm (stand height is 230mm)

3D PRINT SETTINGS The V8-shaped knife slots need to be printed upside down. The stand prints upright. The feet print upright. (the print files are already oriented properly) The feet are unique to each corner and cannot be swapped around.

Resolution: 0.2mm / layer or less

Wall lines count: 2

Build adhesion type: if you have adhesion issues, use a 4~6mm brim.

Infill: 15~20% gyroid (barely any infill areas, just tiny areas here and there)

Supports: None


Discussions

CURL | Knife Rack

77 downloads · 2 years ago in  and 
Charles R
CharlesRegaud2.8K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more