CARLA | Pendant Light E26/27
CARLA | Pendant Light E26/27
Meet the pendant version of my CARLA table lamp.
I set out to design a lamp collection that could be printed quickly while celebrating translucency and color without limits—giving you the freedom to explore, combine, and play with hues however you like.
The CARLA pendant has a soft, lantern-inspired presence that creates a calm, soothing atmosphere.
DIMENSIONS | Ø255 x H150mm
You can get the power cords from Amazon here:
For Europe: E27 cord: https://amzn.to/3OVrZjK E14 cord: https://amzn.to/3TchBqs
For the US: E26/E27 cord: https://amzn.to/434c0qZ
3D PRINT SETTINGS: All STL files are already oriented properly. You need to print 3 parts:
- one shade
- one cylinder that goes in the middle of the shade
- one base for E26/27 light sockets. No supports or adhesion brim needed.
THE SHADE: You can print the shade in vase mode.
For a 0.8mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.3mm/layer (you'll get some holes/gaps if you use 0.4mm/layer or more) • Line width: 1mm • Bottom shell layers: 8
For a 0.4mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.2mm/layer • Line width: 1mm • Bottom shell layers: 12
CYLINDER: You can print the cylinder in "regular" or "vase mode". If your print in "vase mode" (spiral vase or spiralize), the flat round face will be plain. Which is totally fine. For 0.8mm nozzle just make sure to use a wall line width of 1mm. For 0.4mm nozzle, you can print with one wall loop of with a line width of 1mm, or print with 2 wall lines but it might take longer. If you want that round face to have a see-through pattern like on my pictures, you need to:
- print in regular mode
- set top and bottom face layers to 0
- select an infill pattern of your choice (gyroid 35% on my pictures)
- set line width to 1mm
- set wall generator to "arachne".
BASE: No particular tricks for the base. I used a 0.4mm nozzle, 0.2mm per layer and 15% infill. Printed in PLA.
Happy printing!
CARLA | Pendant Light E26/27
SINE | pendant light E27/E26
COROA | pendant light E27/E26
MALLA | woven fruit bowl
MALLA | key bowl
FALDA | Pendant Light E26/27
MALLA | Woven String Art Deco
SAKURA | Pendant Light E26/27
SAKURA | Scalable Pencil Holder
MALLA | nut bowl
![SAKU[MINI] | Table Lamp E14 & E26/27 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2F421bb906-ca95-4bc9-9dba-a6fd01fd6885%2FSAKU%255BMINI%255D_table-lamp_perspective-ON.jpg&w=3840&q=75)
SAKU[MINI] | Table Lamp E14 & E26/27
SAKUMI | Table Lamp E14 & E26/27
SYZYGY | Heart Vase, scalable
TRAMA | Wall Clock
ORB XY | String Art Pendant Light
NINA | Toothbrush cups
PICA | Brush, print-in-place
MORPH | Stackable Egg Cup
ARYZ Divide | Pendant light E26/27
ARYZ Multiply | Pendant light E26/27
Are you able to confirm exactly what filament you used to print this? Thank you!
EDIT: I found the info I was looking for on Instagram.
Translucent PETG by Bambu Lab for the shade Terre Battue PLA by Francofil for the inner cylinder
Yes, that's right! I used those two but it must look great with other types of filaments as well.