Remix Quad Snap Connector - DS Part B.stl
221 downloads · 2 years ago · Been having a bit of a problem having these snap in due to tight tolerances, so I made this remix. I
This model is restricted by licensing terms.
View license.
Been having a bit of a problem having these snap in due to tight tolerances, so I made this remix. I took off some material on the inner rails so it's easier to snap into Part A. Hope Its useful to someone else.
This model is restricted by licensing terms.
View license.
Raised Quad Snap (DS Part B)
Raised Quad Snap (DS Part A)
Remix - Dual snap Connector -DS Part B.stl
Trio Snap Connector (DS Part B)
Dual Snap Connector (DS Part B) - STEP Multiboard Remixing Files
8 mm, Cross Quad Offset Snap - DS Part A - Command Strip.stl
6.25 mm - Quad Snaps (DS Part A) - Medium Command Strip Mount
6.25 mm - Quad Snap (DS Part A) - VHB Tape Mount
6.25 mm - Quad Snaps (DS Part A) - Small Command Strip Mount
Dual T Mounting Offset Snaps, Quad Connector
%2520-%2520Large%2520Command%2520Strip%2520Mount.png&w=3840&q=75)
12.5 mm - Quad Snaps (DS Part A) - Medium Command Strip Mount
%2520-%2520VHB%2520Tape%2520Mount.png&w=3840&q=75)
12.5 mm - Quad Snap (DS Part A) - VHB Tape Mount
%2520-%2520Small%2520Command%2520Strip%2520Mount.png&w=3840&q=75)
12.5 mm - Quad Snaps (DS Part A) - Small Command Strip Mount
Remix of 12.5 mm - Quad Snaps (DS Part A) - Medium Command Strip + Screw Mount
15 mm - Quad Offset Snaps (DS Part A)
_-_Part_1.png&w=3840&q=75)
Remix of 8 mm - Quad Offset Snaps (DS Part A Single Piece)
Remix of 8 mm, Cross Quad Offset Snap - DS Part A
Triple Snap Connector Reverse - DS Part B - Standard (0.5) v2.stl
12.5 mm - Quad Offset Snaps (DS Part A) Community Upload
_-_Large_Command_Strip_Mount.png&w=3840&q=75)