Baby Wyvern - Dragon Familiar
Stl files included - 3mf color files coming soon

Baby Wyvern:

Wyverns are similar to dragons being winged reptilian like creatures but unlike dragons are typically smaller in size, have a more pointed snout and most of all only have two legs where a dragon typically has 4.

Body has minor supports as part of the design

Prints as 3 pieces : 1.Body, 2.Head Base, and 3.Head Top

Recommended settings:

Walls: 3

Infill : 20%

Layer Height : 0.2mm

Supports : Not Required/ Pre-Supported

Bed Adhesion: If there are any issues consider brim or raft.

Notes: For flexible files like this a good first layer is very important, I recommend slowing your speed and having higher layer height (0.28-0.3mm) for the first layer.

Baby Wyvern Familiar 

Baby Wyvern Dragon Body.stl

Western Dragon: The classic dragon, often seen in fantasy, has four legs, a separate pair of wings, and is known for its intelligence and magical abilities.

A 3D-printed dragon keychain is a delightful accessory that combines fantasy and functionality. These tiny, articulated dragons are perfect for adding a touch of whimsy to your keys, bags, or even as a fidget toy.

Included files are basic articulated model, and articulated keychain w/loop. Both stl and 3mf formats supplied.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Measures approximately: 80mmx60mmx20mm

Dragon Miniflex & Keychain

Dragon miniflex.stl

The Chinese Dragon, also known as the loong or lung, is a legendary creature in Chinese mythology and folklore. It is most commonly depicted as a snake-like creature with four legs, symbolizing strength, good luck, and imperial power

A 3D-printed luck/loong dragon keychain is a delightful accessory that combines fantasy and functionality. These tiny, articulated dragons are perfect for adding a touch of whimsy to your keys, bags, or even as a fidget toy.

Included files are basic articulated model, and articulated keychain w/loop. Both stl and 3mf formats are included.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Measures approximately: 80mmx30mmx20mm

Luck Dragon Miniflex & Keychain

luck dragon miniflex.stl

Drake: A drake is similar to a dragon but lacks wings. It has four legs and is often depicted as a scaled reptilian creature.

A 3D-printed drake keychain is a delightful accessory that combines fantasy and functionality. These tiny, articulated dragons are perfect for adding a touch of whimsy to your keys, bags, or even as a fidget toy.

Included files are basic articulated model, and articulated keychain w/loop.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Measures approximately: 80mmx35mmx20mm

Drake Miniflex & Keychain

drake miniflex.stl

Pixie Dragon: A pixie dragon is a diminutive, whimsical creature that combines features of both pixies and dragons. It’s small, colorful, and mischievous, with delicate wings and a playful demeanor .

A 3D-printed pixie dragon keychain is a delightful accessory that combines fantasy and functionality. These tiny, articulated dragons are perfect for adding a touch of whimsy to your keys, bags, or even as a fidget toy.

Included files are basic articulated model, and articulated keychain w/loop.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Measures approximately: 80mmx35mmx20mm

Pixie Dragon Miniflex & Keychain

pixie dragon miniflex.stl

Wyrm: A wyrm is a massive snake-like creature without legs or wings. It’s often associated with ancient myths and legends.

A 3D-printed wyrm keychain is a delightful accessory that combines fantasy and functionality. These tiny, articulated dragons are perfect for adding a touch of whimsy to your keys, bags, or even as a fidget toy.

Included files are basic articulated model, and articulated keychain w/loop. both stl and 3mf formats supplied.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Measures approximately: 80mmx20mmx20mm

Wyrm Miniflex & Keychain

Wyrm miniflex.stl

Wyvern: A wyvern has two legs and a pair of wings, resembling a dragon, but lacks the front legs

A 3D-printed wyvern keychain is a delightful accessory that combines fantasy and functionality. These tiny, articulated dragons are perfect for adding a touch of whimsy to your keys, bags, or even as a fidget toy.

Included files are basic articulated model, and articulated keychain w/loop. both stl and 3mf formats supplied.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Measures approximately: 80mmx60mmx20mm

Wyvern miniflex & Keychain

Wyvern miniflex.stl

Note: this file is free to subscribers as part of the "Welcome Pack".

In the mythic realms of tabletop Rpgs there are those fantastic heroes who seem to bask in the glow of favorable RNG and those of us who remain cursed throughout the ages to the click-clack of our impending failings. Introducing the Vessel of misfortune. an ornate lattice of rare ores. The Vessel's surface is etched with ancient glyphs, their meanings lost to time, yet their purpose unmistakable: to trap the unseen threads of bad luck. The Vessel hungers for those mishaps, calamities and the cosmic blunders that pepper the lives of fragile mortals. Sooth the Vessel's wanting desire by allowing it to feed on Dice that would otherwise curse your heroes quest.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the authorization by subscribing.

3D PRINTING SETTINGS:
Infill: 15-20%
Walls: 3
Layer height : 0.2mm
Supports : No supports needed
Scaling: lid fits perfect at 100%, i have printed to 60% no problem and as large as 150% without issue.

Vessel of Misfortune - A prison for cursed dice

Vessel of Misfortune Base.stl

Miniature moose keychain
Provided as an evaluation model.

Painted 3mf file available

Moose Keychain

moose keychain.stl

moose keychain.3mf

Draconidae Bicauda , or "Flailtail" as it is often referred, is a semiaquatic drake that can be found on rocky shorelines and reefs of the northern isles. They stalk the shallows, their sinuous bodies gliding effortlessly through the water, ready to ambush unsuspecting fish. Striking swiftly Flailtail will whip its barbed tail injecting venom into its prey. Many treasure seekers have sought out this dragon hearing tales of them caching pearls and other shiny objects in their dens.

This little articulated dragon served as my introduction of flexible no support models to my catalog.

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the proper authorization by maintaining a subscription.

3D PRINTING SETTINGS
First Layer: flexible models like this one require a good first layer, I recommend slow and thick (10mm/s and 0.25-0.3mm height).

Layer Height: 0.2mm

Supports: Not Required

Infill: 15-20%

Walls: 3

Size Straight: 300mm long X 82mm wide X 24mm tall

Size Curved: 160mm diameter x 24mm tall

Draconidae Bicauda - Flailtail - An articulated dragon

Draconidae Bicauda curved.stl

Hope you all enjoy my version of a flexible, articulated, and poseable dog.

Prints in place, only needing the pre-supports on the head section.

Provided are two .3mf files, one that is painted in the style of a Bernese mountain dog, and the other as a basic color scheme similar to a retriever.

We would love to see your prints, share and tag us if you like!

PLEASE READ:
All CMD3D designs are Protected under Copyright law.
By Purchasing you gain the right to download and print the designs for your personal use. You do NOT have permission to resell, share or give away those digital files in any way.(this includes derivatives, altered, or "remixed" versions of the designs). Prints of the design may NOT be sold without proper authorization.

To sell prints of CMD3D designs legally, please obtain the authorization Subscribing

3D PRINTING SETTINGS:
Infill: 15-20%
Walls: 3
Layer height : 0.2mm
initial Layer: as with all articulating figure I recommend slowing you initial layer (75% normal speed) and making is slightly thicker(0.25 vs 0.2).
Supports :
Head: Pre-supported
Jaw: may need a brim/raft depending on your printer tolerances
Body : no supports needed

ARTICULATED FIGURE - DOG - BERNESE AND RETRIEVER 3MF

Flexi Dog Bernese  V2.3mf

Created as an alternative testing device for 3d printers,
This jolly little train is good for calibrating machine as it has a variety of hole tolerance and angle tests designed to identify printer problems or deficiencies.

Images are your guide that has tolerance and measurements if needed.
The top surface has been provided with blank labelling areas, so that you may emboss or deboss your text to track filament types and brands.

Benchoo Choo -- a Benchmarking tool

Benchoo Choo.stl

All-access 
$10 / month

Rewards:

*This Months Designs

*Commercial License

*New Models Every Month

1.Commercial License:

As an ACTIVE supporter, you will have a Commercial License and suthorization to sell PHYSICAL prints of any of the designs you have purchased (from cults, MMF) or obtained from your membership here. UPON CANCELLATION of the subscription, the commercial license and authorization expire. Digital Files may not be modified, shared, resold or listed for free.*

2.Free Designs

I will release at least one new public model every month, which are free to Patrons. New subscribers will also be granted access to the previous months models.

3.Early access

The new models will be sent to Patrons and Tribe members one week before they get released to market.

Member

Baby Wyvern Head Top.stl

Baby Wyvern Dragon Flexi Head Bot.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

CMD3D

Achievements

Seedling

Pinned models

ARTICULATED FIGURE - DOG - BERNESE AND RETRIEVER 3MF

Baby Wyvern Familiar

Baby Wyvern Familiar

Dragon Miniflex & Keychain

Luck Dragon Miniflex & Keychain

Drake Miniflex & Keychain

Pixie Dragon Miniflex & Keychain

Wyrm Miniflex & Keychain

Wyvern miniflex & Keychain

Vessel of Misfortune - A prison for cursed dice

Moose Keychain

Draconidae Bicauda - Flailtail - An articulated dragon

ARTICULATED FIGURE - DOG - BERNESE AND RETRIEVER 3MF

Benchoo Choo -- a Benchmarking tool