Check out this medieval fantasy display stand standing almost 21" tall (525mm). Great for displaying your game pieces or other rustic decor. 3 claw support 3 tiers of shelves detailed in hammered metal. This will definitely draw the attention of all your visitors.

Included is all the pieces that make the display stand, and a COMPLETE display stand if you wish to scale it down for other uses.

Printing: This take filament.... I was at about 1.5kg. Just an FYI. Everything prints supports free. Use at least 3+ outside layers and 25% infill for strength. Use a brim on the leg pieces to make sure they have good adhesion.

Assembly: Do any painting before assembly, its easier.

• Everything is labeled with legs 1, 2, or 3 and layers a, b, c, etc... (1a, 2a, 3a). Layer a is the bottom of the bottom shelf, layer b is the top of the bottom shelf, layer c is the bottom of the middle shelf, and so on, working from the bottom to the top. SEE IMAGE.
• The legs will have 1a, for example and the shelf will have a **mirror image **of it. They lines up exactly to show you which piece goes where.
• There are printed positioners that help keep the leg in the approximate position once you are gluing it up.
• Gluing - ONE piece at a time. Use the shelf above the leg to get EXACT position of each leg piece. LET IT DRY completely before moving on.
• The top shelf does not have identifiers on it. It only fits in one position.

Private Use Only.

Printed using Polymaker PolyLite™ PLA https://us.polymaker.com/products/polylite-pla?variant=43818025943097

Become a Thangs.com Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use.

Members get priority recommendations and customization. We would love for you to join! Make sure to like and follow. Post your make so we can see!