This is a collection of models I designed to use with my concentrate rig. I based these on the Gridfinity storage system and the Cotton Swab Holder is just one of the base storage models made by the creator of Gridfinity only its 40mm tall. Here is each models description:

Dab Jar x 1 = Fits one 3ML silicone concentrate jar. 22mm wide

Dab Jar x 2 = Same as above just a 1x2

Carb Cap 2 = Fits 2 carb caps 19mm around at base with

Dab Tool Stand = Fits 2 commom size dab tools on the stands. With the ability to slot (6) multiple 7mm x 1mm spade shaped dab tools vertically.

Cotton Swab Holder = Default 40mm tall 1x1 container fits a decent handful of glob mops.

Gridfinity Modular Dab Station

Dab Tool Stand.stl

Dab Jar x 1.stl

Dab Jar x 2.stl

Carb Cap 2.stl

The CannaCaddy Classic - A 2x3 gridfinity module designed specifically to hold your smoking tools.

I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and grinders, etc. Then, of course, I had to make it fit with the rest of my gridfinity setup.

Want something a bit smaller? Check out the [CannaCaddy Compact here.](https://than.gs/m/964213)

I'm wrapping up the large size (The CannaCaddy Colossal), but for now, the CannaCaddy Classic can hold:

(1): Medium grinder slot. Average size grinder you see around, roughly 58mm diameter, nothing huge and not the smaller ones. Note: smaller/shorter grinders will be fine, the cutouts on the side make it easy to grab.

(1): Rolling Paper slot. Fits the average 1-1/4 and the king size papers.

(2): USB slots. Ideal for the chargers for the average vape battery.

(2): Bic/Lighter slot. Slightly larger to accommodate the lighters with wraps.

(3): Vape cartridge/battery slots. Works well for storing your previous cart when you want to try the new one.

(1): 14mm bowl head slot. Works with the 14mm male portion of your bowl head. Should sit in nicely, but you might have problems if the downstem bit is real long.



CannaCaddy Classic - Gridfinity Compliant Cannabis Supply Holder

CannaCaddyClassicMk1.stl

Need a place to store and/or display all of those BIQU Ducks you've been collecting? Look no further!!! This Gridfinity Duck holder is purpose built with one goal in mind. Make something with the word Gridfinity in it... Also to get all of those damn ducks out of the way. 

This exceptionally crafted model is ideal for storing and displaying your collection of BIQU Ducks. With a design centered around the theme of 'Gridfinity', this model not only provides a practical solution to organize your ducks but also adds a touch of elegance to any setting. This Gridfinity Duck holder stylishly ushers the ducks out of the way, decluttering your spaces in the process. This unique piece in your collection will enhance your 3D model showcasing and offers a creative touch to your BIQU Duck display. Enjoy the intricacy and practicality of this Gridfinity Duck Holder, a perfect functional accessory for any BIQU Duck collector.

Check the BQ store on Amazon using my Affiliate link below:
https://amzn.to/4cOX2sk

For all of my latest uploads, a bill of material, where to download, and links to products used to make them check my website link below:

http://www.perpetualprinter.com/ 

Gridfinity BIQU Duck 

Duck Holder.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6094179.

This 1x1 Gridfinity module holds a Swiss Army knife vertically to minimize its footprint.  The square inside is 22mm which is wide enough for regular and narrow knives.

Prints easily without supports.  

Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman 

https://www.youtube.com/c/ZackFreedman

License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/

#gridfinity



Gridfinity Swiss Army Knife Vertical Stand

6 LTT screwdriver & bit Gridfinity holders.

[All Gridfinity Collection](https://than.gs/c/76394)

[Non-Gridfinity variations](https://than.gs/m/1075678)

Subscribe to my [ membership](https://than.gs/u/445597?plans=true) to access all models or for commercial use.

Gridfinity LTT Linus Tech Tips Screwdriver & Bit Holders

48 squared.step

ALL LTT Gridfinity.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6065920.

This 1x1 gridfinity module holds a stack of 20 6x2 magnets inside.  Roll the thumbwheel and one magnet at a time is delivered to the top tray.  You can operate the magnet server with one hand.

There are interior compartments, but if you fill them with magnets they will prevent the magnets from sliding forward to be served.

To assemble, print all three parts (bin, lid and disc).  Insert a magnet from the outside into the single magnet detent on the outside.  Then insert the disc so the pin fits into the slot.  Finally insert a stack of 20 magnets.  They should be attracted to the exterior magnet.  Reverse them if they are repelled.   Finally put the lid on.

To use simply rotate the thumbwheel.  Remove each magnet as it is served.  If more than a couple of magnets are in the tray they too can prevent the stack of magnets from moving forward to be served.

I added a photo showing how to piggyback more magnets inside without interfering with operation.  When the column gets short enough the magnets on top snap around and add to the column.

Prints without supports, but I print the lid with a 5mm brim.

UPDATE:
Now there is a second lid you can print as an alternative to the original lid.  The original lid is loose so you can remove it with one hand to see if the server is hungry for magnets.  The new lid fits tightly so you will have to use two hands to remove it; however, it won't come off if you drop it. 

UPDATE 2:

There is now a [high-capacity magnet server](https://thangs.com/mythangs/file/1018191).  It isn't a Gridfinity module, but it holds 100+ magnets.

Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman 

https://www.youtube.com/c/ZackFreedman

License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
 

#gridfinity



Gridfinity Magnet Server

Magnet Server Lid II.3mf

Magnet Server Lid II.step

I am very excited to introduce to you the Rolling Gridfinity Octofinity Storage box. This design was inspired by the video that Zack Freedman(https://than.gs/u/76763) did covering 3DPrinty's(https://than.gs/u/103932) Rolling Storage Box(https://than.gs/m/31111). After watching that video I knew I hade to make a Gridfinity version.

I have not fully printed this design myself yet, but I have printed some of the parts to insure fitment.

Here is the BOM
4 x M3x6mm SHCP(Socket Head Cap Screws)
15 x 126mm 1.75mm filament
1 x 130mm 1.75mm filament
8 X Gridfinity Boxes size 3x1x6(or stacked bins equaling the height of the x6)

That's it! Every other part is printed!

EDIT: I have now printed all the parts(of course I had to print my Gridfinity bins in ROYGBIV color scheme). I did find that the spacing for the Octofinity bin was slightly larger than I liked so I decreased this spacing slightly. Changes have been uploaded.

Rolling Gridfinity Octofinity Box

I am very excited to introduce to you the Rolling Gridfinity Octofinity Storage box. This design was inspired by the video that Zack Freedman(https://than.gs/u/76763) did covering 3DPrinty's(https://than.gs/u/103932) Rolling Storage Box(https://than.gs/m/31111). After watching that video I knew I hade to make a Gridfinity version.

I have not fully printed this design myself yet, but I have printed some of the parts to insure fitment.

Rolling Gridfinity Octofinity Box.3mf

The Multiboard Demo Pack is a free pack that will show you the flexibility and magic of Multiboard with the least amount of parts.

Watch the video tutorial: https://www.youtube.com/watch?v=5ujBraWJPVI

**Printing Guidelines**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings. It's designed for 0.4 mm Nozzle Size.

**What's Multiboard?**

Multiboard is a ridiculously modular building system that lets you create anything from storage walls, bin systems, or any project you can think of.

Multiboard already has over 2.7 million total downloads, and tens of thousands of active community members who are using Multiboard almost everywhere.

Learn more at [multiboard.io](https://www.multiboard.io/)

Multiboard Demo Pack (FREE)

Multiboard Demo Pack - 6x6 Tile.3mf

Multiboard Demo Pack - Parts 1.3mf

OrganizeFinity

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

BustrBuilds

Achievements

Explorer