Built Over Bot

Select a membership plan

Monthly billing

Model is included in this plan
Available now

20% off

Associate's

Associate's

$8.00

/ month

when billed annually

This plan is for those that want to access a few of our files but are not quite sure if they want to commercially print yet!

-Get 15 downloads of your choice every month. You can choose from our large library of files. We add more files to the catalog every week!

-As long as you are an active member, you will be allowed to sell prints of our files commercially.

-Access to our discord!

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

Model is included in this plan
Available now

20% off

Master's

Master's

$12.00

/ month

when billed annually

This plan is for those that want to sell physical prints of our files or want access to more of our files!

-Get 30 downloads of your choice every month. You can choose from our large library of files. We add more files to the catalog every week!

-Right to sell physical prints of our files that are available on Thangs during your active membership!

-Access to our discord.

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

Built Over Bot13K followers

Follow

Fox V3 Keychain 3d model

Fox V3 Keychain 3d model

Fox V3 Keychain 3d model

Fox V3 Keychain

91 downloads · 2 years ago · Keychain version of our fox version 3! This will print better with .16 or smaller layer lines at th

This model is restricted by licensing terms.

View license.

Keychain version of our fox version 3!

This will print better with .16 or smaller layer lines at the files current size.

Tags:

Community Makes (1)

I printed these with the option to add a keychain. The keychain hole was somewhat fiddle to get a 0.35" loop into. You might opt to get a bigger keychain attachment piece, or modify the model slightly. Seemed to me like my jump loops between the keychain and model were a bit small. They were also a pain to install.

Model printed great. I even opted to go a step further and color the pawpads pink on all four paws - i know some people who absolutely adore those added features. For a plate of 8 of these it was an almost 13 hour print job, on my P1S, and $3.23, with 66g flushed as waste even with flush into infill turned on -- If I was to print just 1 on a plate, it would be an almost 8 hour print job, on my P1S, at $1.95, with 74g flushed as waste.

I printed these with the option to add a keychain. The keychain hole was somewhat fiddle to get a 0.35" loop into. You might opt to get a bigger keychain attachment piece, or modify the model slightly. Seemed to me like my jump loops between the keychain and model were a bit small. They were also a pain to install.

Model printed great. I even opted to go a step further and color the pawpads pink on all four paws - i know some people who absolutely adore those added features. For a plate of 8 of these it was an almost 13 hour print job, on my P1S, and $3.23, with 66g flushed as waste even with flush into infill turned on -- If I was to print just 1 on a plate, it would be an almost 8 hour print job, on my P1S, at $1.95, with 74g flushed as waste.

Community Makes (1)

I printed these with the option to add a keychain. The keychain hole was somewhat fiddle to get a 0.35" loop into. You might opt to get a bigger keychain attachment piece, or modify the model slightly. Seemed to me like my jump loops between the keychain and model were a bit small. They were also a pain to install.

Model printed great. I even opted to go a step further and color the pawpads pink on all four paws - i know some people who absolutely adore those added features. For a plate of 8 of these it was an almost 13 hour print job, on my P1S, and $3.23, with 66g flushed as waste even with flush into infill turned on -- If I was to print just 1 on a plate, it would be an almost 8 hour print job, on my P1S, at $1.95, with 74g flushed as waste.

I printed these with the option to add a keychain. The keychain hole was somewhat fiddle to get a 0.35" loop into. You might opt to get a bigger keychain attachment piece, or modify the model slightly. Seemed to me like my jump loops between the keychain and model were a bit small. They were also a pain to install.

Model printed great. I even opted to go a step further and color the pawpads pink on all four paws - i know some people who absolutely adore those added features. For a plate of 8 of these it was an almost 13 hour print job, on my P1S, and $3.23, with 66g flushed as waste even with flush into infill turned on -- If I was to print just 1 on a plate, it would be an almost 8 hour print job, on my P1S, at $1.95, with 74g flushed as waste.

Discussions

nikkolaus1 year ago

I printed these with the option to add a keychain. The keychain hole was somewhat fiddle to get a 0.35" loop into. You might opt to get a bigger keychain attachment piece, or modify the model slightly. Seemed to me like my jump loops between the keychain and model were a bit small. They were also a pain to install. Model printed great. I even opted to go a step further and color the pawpads pink on all four paws - i know some people who absolutely adore those added features. For a plate of 8 of these it was an almost 13 hour print job, on my P1S, and $3.23, with 66g flushed as waste even with flush into infill turned on -- If I was to print just 1 on a plate, it would be an almost 8 hour print job, on my P1S, at $1.95, with 74g flushed as waste.

I printed these with the option to add a keychain. The keychain hole was somewhat fiddle to get a 0.35" loop into. You might opt to get a bigger keychain attachment piece, or modify the model slightly. Seemed to me like my jump loops between the keychain and model were a bit small. They were also a pain to install.

Model printed great. I even opted to go a step further and color the pawpads pink on all four paws - i know some people who absolutely adore those added features. For a plate of 8 of these it was an almost 13 hour print job, on my P1S, and $3.23, with 66g flushed as waste even with flush into infill turned on -- If I was to print just 1 on a plate, it would be an almost 8 hour print job, on my P1S, at $1.95, with 74g flushed as waste. 3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

PrinterBambu Lab P1S

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPLA+

Layer height0.2 mm

Infill density15 %

Fox V3 Keychain

91 downloads · 2 years ago in

Built Over Bot13K followers

Follow

This model is restricted by licensing terms.

View license.