Attention: accompany the wing and ball during the first joint.
The brim is mandatory. I repeat: mandatory, as is the zhop. I remind you to watch the tutorial if necessary. patreon.com/posts/z-hop-91398118 Printed at 100% and 90%. I do not recommend printing them smaller than 80%. Be patient.
I hope you can have fun and enjoy this lovely dragon. Careful not to break the wings and get hurt, some filaments create more thickness! ZHOP at 0,8 is raccomanded.
Good calibration, infill and retraction is necessary for a great result. Functional print sizes range from 100% to 80%; smaller ones may break or have printing errors.
NOZZLE: 0,4 mm. LAYER: 0.16 OUTER WALLS: 3 INFILL: 15% SUPPORTS: NO Z-HOP: 0,8
For personal use only All my files are protected by Copyright, should NEVER be shared, resold or remixed. To sell physical print of my design and if you want to get the latest Models and exclusive designs subscribe a membership plan.