_Articulated_Baby_Dragon.png&w=3840&q=75)
3 TAIL SIZE and 3 POSITION for DIFFERENT PRINTER A cute Articulated Dragon, great movement. 6 different files for different printers and tail sizes. · 3 files in rectangular/square position resizable up to 50%. · 3 files for printmill/infinite Z printers. · 3 files for resin printers with 20 cm large screen (TESTED).
It is printed in place and doesn’t require supports. If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result. If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.
FDM SETTING NOZZLE DIAMETER: 0,4 mm. LAYER: 0.2 or less OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0,2 – 0,4
RESIN SUGGESTED SETTINGS No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from joints.
For personal use only All my files are protected by Copyright, should NEVER be shared, resold or remixed. To sell physical print of my design and if you want to get the latest Models and exclusive designs subscribe a membership plan.