Zonestar P802QR2 Extruder Cable Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3004261.

Update:24_08_18

Version 2 includes retention loops for the Boden tubes.

This is a Cable cover for the top of the Extruder for the Zonestar P802QR2.

The cover fastens to the existing 3.5mm hole to the left of the extruder head. You will need a M3 x 7mm minimum bolt and nut. I used a M3 x 10mm but spaced off the front with washers.

Printing

Does not require support, 0.2 resolution with 20% infill. Version 2 is printed on its side. I have included some break away supports where required.

Collection of all my upgrades for the Zonestar at the following link: https://www.thingiverse.com/thing:2936870