tracking pixel
Michael M

sketches off the wall of Pokémon out and about - Fan art set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model
2D
3D
Makes
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model
sketches off the wall of Pokémon out and about - Fan art set of bookmarks 3d model

Bonus week 24 - Pokémon. don't need to say more.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70.24x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Pink At layer #16 (1.36mm) swap to Yellow At layer #20 (1.68mm) swap to Jade White for the rest.


1 Likes3 DownloadsNovember 5, 2024


1 Likes3 DownloadsNovember 5, 2024