fan art sketches of Disney princess Snow White - Set of 3 Bookmarks

Week 11 is here - and first up is a set of bookmarks showcasing fan art of Disney princess Snow White. Enjoy!

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA Default White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Marine Blue At layer #8 (0.72mm) swap to Lemon Yellow At layer #12 (1.04mm) swap to White for the rest.