I have a number of piece of hueforge art to share with the membership tonight. First up is a depiction from the Movie series the Matrix.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic dark Green Transmission Distance: 2
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to dark Green
At layer #10 (0.88mm) swap to Green
At layer #16 (1.36mm) swap to Jade White for the rest.
