tracking pixel
Michael M

The horse power of the steam engine - combination of wood and power set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model
2D
3D
Makes
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model
The horse power of the steam engine - combination of wood and power set of bookmarks 3d model

Week 14 - they say the steam engine put the horse out of business, but what if the horse was a steam engine??

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 63.44x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #11 (0.96mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest.


2 Likes9 DownloadsSeptember 3, 2024