tracking pixel
Michael M

The Animal adventurers as the enter the Labyrinth - Set of Bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model
2D
3D
Makes
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model
The Animal adventurers as the enter the Labyrinth - Set of Bookmarks 3d model

Week 16 starts off with a fun set of bookmarks. The animal adventurers have their portrait taken as they begin their journey through the labyrinth.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest.


1 Likes7 DownloadsSeptember 16, 2024