Spring Cherry Tree Blossoms and the beautiful artist Geisha

Bonus model - this picture of spring with a beautiful Geisha entertainer. Something I couldn't pass up sharing.

For this model: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 221.53x225mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Beige At layer #19 (1.6mm) swap to Ivory White for the rest.