Princesses can fight too - Snow white in Armor - Set of bookmarks

Bonus set for week 22 - Snow white in a bit of a different look. She has her own battle armor. 5 colors

for this model: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70.23x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA Default White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Brown At layer #10 (0.88mm) swap to Pink At layer #13 (1.12mm) swap to Latte Brown At layer #18 (1.52mm) swap to White for the rest.