Michael M

Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 6
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 6
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
2D
3D
Makes
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model
Polarity - Light and dark or Good and Evil - portrait of life - Set of bookmarks 3d model

Week 18 set 2 - this one is interesting to me. The pictures show a woman who is different in light and dark. the bookmarks are split down the middle.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Green At layer #12 (1.04mm) swap to Jade White for the rest.


1 Likes3 DownloadsOctober 1, 2024