Pokemon Fanart - Charizard evolution and Power - Set of 3 Bookmarks

Week 8 - Some more fanart. This one is from Pokemon and is that of Charizard and his less evolved forms. Something different for sure.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Default White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #14 (1.2mm) swap to Yellow At layer #18 (1.52mm) swap to White for the rest.