Hot Rod needed to get out of Hell's way - Set of 3 Bookmarks
byBooneCo3dBonus for this week is a number of additional cars. This first one is a great model of a hot rod on fire racing like life depended on it. It is a fun one to print.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x118.07mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic White Transmission Distance: 5
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #10 (0.88mm) swap to Orange At layer #16 (1.36mm) swap to White for the rest.