Hot Rod Art - Classic Chop shop special Racer - Corvette Mustang mix
byBooneCo3dAnother bonus - this one is a chop shop special. Interesting look with kind of a Shelby front end and corvette body. Tribute to the chop shop mods build.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.45mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.1mm and the Actual Depth is 1.4mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Blue At layer #7 (0.64mm) swap to Jade White for the rest.