2nd week of June and here is the first set to be uploaded. This one is a little different with multiple runs of black and white in it to give some unique depth. One of my favorites recently. Enjoy!
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Jade White
At layer #16 (1.36mm) swap to Black
At layer #19 (1.6mm) swap to Red
At layer #22 (1.84mm) swap to Jade White for the rest.