Halloween Fashion can be a Witches Treat Year round - Set of 3 Bookmarks

Free Set of Bookmarks to celebrate the season. Halloween should be a year round holiday.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 69x166.38mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #14 (1.2mm) swap to Mandarin Orange At layer #19 (1.6mm) swap to White for the rest.