Funky Fish traveling the town on unicycles - Set of Bookmarks

Week 11 - These are inspired by the Artist Greg Simkins. He does amazing things with acrylics and makes some wonderous creatures. These fish are in that style and ready to travel.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Grass Green Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Blue Gray At layer #14 (1.2mm) swap to Grass Green At layer #18 (1.52mm) swap to Ivory White for the