Fantasy Flourishes of the Beautiful Unicorn - Set of 3 Bookmarks

(Updated to be Thicker) Week 9 second bookmark set is that of Unicorns. Came up with this different idea and they popped right off the page. Enjoy!

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Beige Transmission Distance: 8 PLA Bambulab White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.48mm) swap to Pink At layer #12 (0.88mm) swap to Beige At layer #18 (1.36mm) swap to White for the rest.