Fan Art of the cute little cat - Say Hi to My Little Kitty on the town Set of Bookmarks
byBooneCo3dWeek 12 - Fanart set of My Little Kitty bookmarks. Something for the girls out there (well, and some boys too).
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Pink At layer #14 (1.2mm) swap to Jade White for the rest.