Fan Art of the Simpsons - Bart Simpson as an Aged Winged Knight in a fantasy Realm

Another art piece. I was messing around with the Simpsons and came up with this amusing mishmash. Bart Simpson ready to slay a dragon.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Green At layer #12 (1.04mm) swap to Pink At layer #18 (1.52mm) swap to Jade White for the rest.