tracking pixel
Michael M

Fan Art of Samus Aran from Metroid - Wall Art

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 3
Fan Art of Samus Aran from Metroid - Wall Art 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
Fan Art of Samus Aran from Metroid - Wall Art 3d model
2D
3D
Makes
Fan Art of Samus Aran from Metroid - Wall Art 3d model
Fan Art of Samus Aran from Metroid - Wall Art 3d model
Fan Art of Samus Aran from Metroid - Wall Art 3d model

Last for this evening - a picture of the main player in Metroid.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #14 (1.2mm) swap to Lemon Yellow

Border Only Colors from here until the end. At layer #24 (2mm) swap to Jade White for the rest.


1 Likes1 DownloadsNovember 8, 2024


1 Likes1 DownloadsNovember 8, 2024