tracking pixel
Michael M

Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 3 of 5
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model
BooneCo3d
BooneCo3d
|
Image 3 of 5
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model
2D
3D
Makes
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model
Fan Art from Nightmare before Christmas - Portraits of Jack and Sally through the years - Set of 3 B 3d model

Week 10 - fan art of Jack and Sally from Nightmare before Christmas. Halloween is coming and Christmas is around the corner. Enjoy.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to Ice Blue At layer #18 (1.52mm) swap to Jade White for the rest.


11 Likes19 DownloadsAugust 6, 2024