Bonus Set late for this week, but it has been a crazy week personally. I think things should slow down now. Here is a set of fanart bookmarks showcasing some Jedi women I developed the concepts for. To be from the High Republic.
for these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.9x200mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Pine Green Transmission Distance: 1
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Pine Green
At layer #12 (1.04mm) swap to Beige
At layer #17 (1.44mm) swap to Jade White for the rest.