Week 5, Start of a new month! First set uploaded is that of Darth Vader. Created these sketches showing the greatest Villain! Enjoy!
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Dark Brown
At layer #18 (1.52mm) swap to White for the rest.