Fan Art Set of Bookmarks #2 - Anime and Manga title Dandadan inspired

A second set to share from Dandadan. I jumped into one of my favorite AI image designers and came up with some interesting designs. Though they might not be 100% accurate to the show, they looked good enough to share.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #16 (1.36mm) swap to Brown At layer #18 (1.52mm) swap to Jade White for the rest.