Another bonus set for week 3. This one is a but different but i created these interesting pictures displaying different swords. The can be of whatever the printer desires.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 74.86x205.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Ice Blue
At layer #16 (1.36mm) swap to White for the rest.