tracking pixel
Michael M

Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model
2D
3D
Makes
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model
Dust Bunnies - the cleaning crew that no one sees - Set of bookmarks 3d model

First bonus for the week. Some dust bunnies so they can be seen.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70.24x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to Ash Gray At layer #16 (1.36mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.


0 Likes2 DownloadsNovember 5, 2024


0 Likes2 DownloadsNovember 5, 2024