Michael M

Death and his many faces - the images of Halloween Set of Bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Death and his many faces - the images of Halloween Set of Bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Death and his many faces - the images of Halloween Set of Bookmarks 3d model
2D
3D
Makes
Death and his many faces - the images of Halloween Set of Bookmarks 3d model
Death and his many faces - the images of Halloween Set of Bookmarks 3d model
Death and his many faces - the images of Halloween Set of Bookmarks 3d model
Death and his many faces - the images of Halloween Set of Bookmarks 3d model
Death and his many faces - the images of Halloween Set of Bookmarks 3d model

Week 12 - Set of bookmarks depicting the cloaked skeleton. Halloween time has started.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #11 (0.96mm) swap to Yellow At layer #18 (1.52mm) swap to Jade White for the rest.


6 Likes15 DownloadsAugust 19, 2024