Michael M

Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model
2D
3D
Makes
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model
Dark Tales of Little Red Riding Hood in the Oppressive Forest - Set of bookmarks 3d model

Week 16, 3rd set - more of an artsy affair. These are watercolor depictions of little red riding hood walking through the forest.

For these models:( Note that the black is used twice when printing.)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Green At layer #10 (0.88mm) swap to Black At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Jade White for the rest.


2 Likes6 DownloadsSeptember 16, 2024