Crazycars are on the Loose! Not all cars have to be bad, meet Blingy Barb
byBooneCo3d4 in a 4 part car set, or rather car imagination. What if the cars were more than just nice children's favorites. What if they were Monsters? Ok, so this one is less of a monster and more attack of the Pink. This is what some may look like anyway. Enjoy.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Pink At layer #14 (1.2mm) swap to Sakura Pink At layer #21 (1.76mm) swap to Jade White for the rest.