Classic Monsters - the villains in black and white cinema - Set of Bookmarks

The creature from the black lagoon, Frankenstein's monster and Dracula are the villains in this bonus set of bookmarks.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #10 (0.88mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest.