Celtic knot carvings celebrating the Mystical Wolf - Set of 3 Bookmarks
byBooneCo3dAnother old design I updated and am sharing here for free.
For these Models: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.33x204.99mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Brown At layer #10 (0.88mm) swap to Beige At layer #16 (1.36mm) swap to White for the rest.