Celebration of Halloween - Jack and Sally Dressed for the festivities - Clockface

This is the 4th design I am sharing tonight. I also designed it to be printed for an upcoming charity event.

Jack and Sally from Nightmare Before Christmas. Worked some hueforge magic to get the colors just right.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225x225mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Ice Blue At layer #10 (0.88mm) swap to Ivory White At layer #12 (1.04mm) swap to Black At layer #15 (1.28mm) swap to Orange At layer #22 (1.84mm) swap to Jade White for the rest.