Boom Cat, the Space Age Bounty Hunter Art Piece
byBooneCo3dBonus tonight, a piece of art showcasing Boom Cat, the Space Bounty Hunter. Part of a series I will put up over the next few days, so look out for her teammates. Something fun to print, enjoy.
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Pink At layer #16 (1.36mm) swap to Jade White for the rest.