Boeing B-17 Flying Fortress US Air Force Bomber WWII - Tribute Set of Bookmarks

Free set of bookmarks to be used for those that want to mark their war novels. This is a small tribute to my grandfather who was a pilot for the US Army Air Force during WWII. With his engineering background he spent much of his time training pilots and testing aircraft. He flew larger planes like the DC-5 and the B-17.

The coloring turned out great using only 3 colors. The Bambu beige works great for creating gradients.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Beige At layer #16 (1.36mm) swap to Jade White for the rest.