Artwork of the Cat and the world he runs in - Set of 3 Bookmarks
byBooneCo3dSecond Set for week 19. This one is a double exposure depiction of a cat with the city/forest he may prowl.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 63.44x200mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #11 (0.96mm) swap to Blue Gray At layer #17 (1.44mm) swap to Jade White for the rest.