Artful Creation - Blueprint style Picture of Back to the Future's DeLorean - Car Collection Model

Free model - wanting to share with everyone. This is a hueforge creation showing a blueprint or mechanical drawing of the DeLorean used in Back to the Future.

It prints well with a 0.4mm nozzle as shown in the pictures, but a 0.2mm nozzle would help some of the finest details be a touch sharper. Even at 0.4mm you can read almost all the fine print.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149.85x210mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 2 unique filaments

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Jade White for the rest.